CHLORINATOR AND ACCESSORIES

Product Details:

Manifold Valves are Chlorine Valves It is to be located in the manifold Frame. Normally, during operations these Valves are used to isolate the respective containers from the system.

Product Details:

Gas Filter represents a new approach to the removal of the nuisance causing impurities in the chlorine gas. This filter has two chambers.
The lower portion acts as a trap for liquid impurities (reliquifies gas) and the sudden enlargement decreases the velocity so that gas is unable to carry entrained droplets of liquid chlorine, which is high in ferric Chloride.
The upper portion has a removable filter element. The filter element is especially impregnated so that ferric chloride “plates out” rapidly as it passes through the element, Therefore the filter acts as both a filter and a condensate trap.

Product Details:

All wetted parts are non-corrosive and suitable for chlorine gas. The Function is to control the flow of chlorine gas across the Rotameter

Product Details:

With the support of our talented team of professionals, we are engaged in offering  Self Contained Breathing Apparatus

Product Details:

Automatic Vacuum Regulator is the most important part of the Chlorinator. Automatic Vacuum Regulator [AVR] is designed to close at pressure and open at vacuum (normally). So, without vacuum it should not allow chlorine gas to the injector of the Chlorinator. The logic is that, whenever there is loss of vacuum in the Injector due to no flow or low pressure of motive water, Pipe breakages in Vacuum line, the regulator does not allow the flow of hazardous Chlorine gas, making this system foolproof in terms of safety and operation.

Product Details:

Coiled Copper Tube Connector consists of an annealed copper tube (3/8” mm / O.D 10mm / 1.5mtrs. length) with Brass nipples and Brass unions (5/8” BSP [F]) on either side to suit chlorine container Valves. The brass nipple is brazed to the copper tube.
The Function of Coiled Copper Tube Connector allows flexibility of connection to the Tonner or Cylinder.

Product Details:

Function is to regulate the pressure drop created due to the differential across the Orifice of the Flow Control Valve. Differential Pressure Regulator [DPR] is provided to get stable reading across the Rota meter and also to regulate turbulent action of Vacuum to manageable level. DPR comes with Chlorinators of capacities of 8 Kgs/hr and above. In smaller capacities the pressure drop is negligible to provide DPR.

Product Details:

Pressure gauge with appropriate Material of construction for Chlorine usage is mounted on the top of the AVR or just before AVR, for indicating the chlorine inlet pressure to the AVR. Pressure Gauge SS316 Diaphragm Type Chemical Sealed specially used for Chlorine.

Product Details:

PRESSURE RELIEF VALVE Releases the held-up volume of gas in the vacuum pipeline, during vacuum breakage. Set relief pressure is 0.3 Kg/cm2. These are Vacuum to close and pressure to relieve valve [>0.3 bar]
CHECK VALVE allows only “Chlorine Gas” to pass through and prevents the water to enter.
EMERGENCY DRAIN VALVE Drains the water that passed through a failed Check Valve. Second line of protection from water entering the system. Please change both the “O” rings of Check Valve and Drain Valve after you notice the water, gas passing through this valve.
VACUUM RELIEF VALVE Relieves the excess vacuum (i.e.) vacuum greater than 500 mm of Hg. Prevents the effect of “Suck Back”. Also called Vacuum Breaker.

Product Details:

Made of Borosilicate Glass with Tapered internal diameter and with PVC Fittings and Teflon Float. Also called variable area Flowmeter. It comes calibrated in various ranges starting from 100gms/hr to 150kgs/hr. The Function is to indicate flow in Gms/hr or Kgs/hr or Pounds/Hr of chlorine.

Product Details:

The range of frame / floor mounted FRP cabinet offered by us. It finds application where minimum components of networking are required to be enclosed. Our product range is available in both small size and Big size models that can withstand high load and provide neat structured cabling. Ergonomically designed to accommodate standard accessories.